The output of stone mill pulverizing equipment is related to the economic benefits of stone mill pulverizing equipment users, so everyone is eager for the output of stone mill pulverizing equipment to reach a certain quantity. Therefore, due to different ingredients, the output of many stone mill pulverizing equipment will not meet the standard. What is the reason? What should we do in this case?

如果石磨制粉設備的產量太低，檢查下面的石磨制粉設備的磨輥是否會(huì )出現異常。如果磨輥出現異常，那么就要考慮以下幾個因素

If the output of the stone mill pulverizing equipment is too low, first check whether the grinding roller of the following stone mill pulverizing equipment will be abnormal. If the grinding roller is abnormal, the following factors should be considered

①石磨制粉設備研磨物料的容量。小麥逐步磨碎后，隨著胚乳下垂和刮削，物料的容重隨著磨皮次數的推回而降低，粉碎機的單位流量也隨之降低。

① Capacity of grinding materials of stone mill pulverizing equipment. After the wheat is gradually ground, with the endosperm sagging and scraping, the bulk density of the material decreases with the pushing back of the grinding times, and the unit flow of the crusher also decreases.

②石磨制粉設備磨齒高度。在磨削過程中，由于磨齒下垂磨損，磨齒難以抓住物料，磨輥表面的滑動增大，即物料在磨削區的移動速度加快減少。并且由于磨齒高度降低，兩磨齒間隙中的物料減少，從而使平面磨床的產量降低。

② Grinding gear height of stone mill pulverizing equipment. In the grinding process, due to the sagging wear of the grinding teeth, it is difficult for the grinding teeth to grasp the material, and the sliding of the grinding roller surface increases, that is, the moving speed of the material in the grinding area increases and decreases. And because the grinding height is reduced, the material in the gap between the two grinding teeth is reduced, so that the output of the plane grinder is reduced.